Publications

(1) Li, Z., Farhat, Z., Islam, M., (2020) Investigation of Single Particle Erosion Behavior of Electroless Ni-P-Ti Composite Coatings, Materials Engineering and Performance, accepted. (NSERC)

(2) Li, Z., Farhat, Z., Jarjoura, G., Fayyad, E., Abdullah, A., Hassan, M. (2020) Investigation of Bending and Tensile Behaviour of Ni-P-Ti Composite Coating, Journal of Engineering Materials and Technology (ASME), accepted. (QNRF)

(3) Li, Z., Farhat, Z., (2020) Hertzian indentation Behavior of Electroless Ni-P-Ti Composite Coatings, Metallurgical and Materials Transactions A., accepted. (NSERC)

(4) Rana, A. and Farhat, Z. (2020) Thermal Fatigues - A Quest for Assets Integrity, Inspetioneering, 26: 1-4. (NSERC)

(5) Rana, A. Islam, M. and Farhat, Z. (2020) Effect of Graphene Nanoplatelets (GNP) Addition on Erosion-Corrosion Behavior of Ni-P Coatings, Journal of Bio- and Tribo-Corrosion, 6: 1-14. (NSERC)

(6) Al-Mokhtar, M., Farhat, Z., Warkentin, A. and Gillis, J. (2020) Effect of a Moving Automated Shot Peening and Peening Parameters on Surface Integrity of Low Carbon Steel, Journal of Materials Processing Technology, 277: 1-12. (NSERC)

(7) Rana, A. and Farhat, Z. (2020) Case Study on Failure of Ti Lining, International journal of Materials Science and Engineering, accepted. (NSERC)

(8) Maclean, M., Farhat, Z., Jarjoura, G., Fayyad, E., Abdullah, A., Hassan, M. (2019) Effects of Superelastic nano-NiTi Additions on Electroless Ni–P Coating Properties under Bending, Surface and Coating Technology, 378: 1-9. (QNRF)

(9) Cameron, N. and Farhat, Z. (2019) Investigation into the Wear and Dent Resistance of Ni/Ti Nanolaminates and Superelastic NiTi Coating, Journal of Materials Engineering and Performance, 28: 6033-6041. (NSERC)

(10) Maclean, M., Farhat, Z., Jarjoura, G., Fayyad, E., Abdullah, A., Hassan, M. (2019) Erosion and Toughening Mechanisms of Electroless Ni-P-nano-NiTi Composite Coatings on API X100 Steel under Single Particle Impact, Journal of Surface Engineered Materials and Advanced Technology, 9: 88-106. (QNRF)

(11) Cameron, N. and Farhat, Z. (2019) Single Particle Erosion Behavior of NiTi-Based Nanolaminates and Superelastic NiTi Monolayer Coatings, Coatings, 9: 617-628. (NSERC)

(12) Almotairi, A., Farhat, Z. and Warkentin, A. (2019) Thermal Damage of Conventional Hard Chromium Coatings on 416 Stainless Steel, Engineering Failure Analysis, 105: 1118-1130. (NSERC)

(13) Rana, A. and Farhat, Z. (2019) Case Study on Failure of Hexane Storage Tank, Corrosion Management (British institute of Corrosion), 150: 20-22. (NSERC)

(14) Fayyad, E., Hassan, M., Rasool, K., Mahmoud, K., Mohamed, A., Jarjoura, G., Farhat, Z. and Abdullah, A. (2019) Novel Electroless Deposited Corrosion - Resistant and Anti-Bacterial NiP–TiNi Nanocomposite Coatings, Surface and Coating Technology, 369: 323-333. (QNRF)

(15) Li, Z., Farhat, Z., Jarjoura, G., Fayyad, E., Abdullah, A., Hassan, M. (2019) The Synthesis and Characterization of Scratch Resistant Ni-P-Ti Based Composite Coating, Tribological Transactions 62: 880-896. (QNRF)

(16) Rana, A. and Farhat, Z. (2019) Neighborhood – An influential Factor for Material Damage, Materials Performance, 58: 52-55. (NSERC)

(17) Cameron, N. and Farhat, Z. (2019) Fabrication, Characterization, and Evaluation of Monolithic NiTi Nanolaminate Coatings, Tribological Transactions, 62: 1007-1018. (NSERC)

(18) Rana, A. and Farhat, Z. (2019) Preparation and Tribological Characterization of Graphene Incorporated Electroless Ni-P Composite Coatings, Surface and Coating Technology, 369: 334-346. (NSERC)

(19) Gorman, B., Farhat, Z. and Warkentin, A. (2019) Novel Method of Residual Strain Analysis via a Non-Bonded Interface Technique in Combination with the Circular Grid Analysis Method, Journal of Engineering Materials and Technology (ASME), 141: 1-10. (NSERC)

(20) Maclean, M., Farhat, Z., Jarjoura, G., Fayyad, E., Abdullah, A., Hassan, M. (2019) Fabrication and Investigation of the Scratch and Indentation Behaviour of New Generation Ni-P-NanoNiTi Composite Coating for Oil and Gas Pipelines, Wear, 426: 265-276. (QNRF)

(21) Gaier, M., Todorova, T., Russell, Z., Farhat, Z., Zwanziger, J. and Plucknett, K. (2019) The Influence of Intermetallic Ordering on Wear and Indentation Properties of TiC-Ni3Al Cermets, Wear, 427: 390-400. (NSERC)

(22) Gaier, M., Farhat, Z. and Plucknett, K. (2019) The Effects of Graphene Nano-Platelet Additions on the Sliding Wear of TiC-Ni3Al Cermets, Tribology International, 130: 119-132. (NSERC)

(23) Fayyad, E., Abdullah, A., Mohamed, A., Jarjoura, G., Farhat, Z. and Hassan, M. (2019) Effect of Electroless Bath Composition on the Mechanical, Chemical, and Electrochemical Properties of New NiP-C3N4 Nanocomposite Coatings, Surface and Coatings Technology, 326: 239-251. (QNRF)

(24) Chaar, O., Jarjoura, G., Farhat, Z. and Nader R. (2019) Development of Novel Corrosion Resistant Electroless Ni-P Composite Coatings for Pipeline Steel, Lebanese Science Journal, 20: 262-271. (NSERC)

(25) Onuoha, C., Memarrashidi, Z., Kipouros, G., Plucknett, K. and Farhat, Z. (2018) The Aqueous Electrochemical Response of TiC-Stainless Steel Cermets, Metals, 8: 398-424. (PRAC)

(26) Fayyad, E., Hassan, M., Abdullah, A., Mohamed, A., Jarjoura, G. and Farhat, Z. (2018) Recent Advances in Electroless-Plated Ni-P and its Composites for Corrosion and Erosion Applications: A Review, Emergent Materials, 1: 3-24. (QNRF)

(27) Rana, A. and Farhat, Z. (2018) Mitigating Materials Damages Through Risk-Based Inspections, Materials Performance, 57: 46-49. (NSERC)

(28) Gaier, M., Sparling, W., Memarrashidi, Z., Farhat, Z. and Plucknett, K. (2018) The Influence of Mo2C Additions on the Microstructural Development and Sintering Response of TiN-Ni3Al Cermets, International Journal Refractory Metals and Hard Materials, 71: 262-272. (NSERC)

(29) Wang, C., Farhat, Z., Jarjoura, G, Hassan, M. and Abdullah, A. (2018) Indentation and Bending Behavior of Electroless Ni-P-Ti Composite Coating on Pipeline Steel, Surface and Coating Technology, 334: 243-252. (QNRF)

(30) Fayyad, E., Abdullah, A., Hassan, M., Mohamed, A., Wang, C., Jarjoura, G. and Farhat, Z. (2018) Synthesis, Characterization and Application of Novel Ni-P-Carbon Nitride Nanocomposites, Coatings, 8: 37-50. (QNRF)

(31) Alam, T. and Farhat, Z. (2018) Slurry Erosion Surface Damage under Normal Impact for Pipeline Steels, Engineering Failure Analysis, 90: 116-128. (QNRF)

(32) Masry, L., Jarjoura, G., Farhat, Z., Fayyad, E., Abdullah, A., Hassan, M. and Mohamed, A. (2018) Development of Corrosion Resistant Novel Electroless Ni-P Composite Coatings for Pipeline Steel, International Journal of Engineering Science & Research Technology, 7: 122-134. (QNRF)

(33) Gaier, M., Sparling, W., Memarrashidi, Z., Farhat, Z. and Plucknett, K. (2018) Sintering Response and Microstructure Development of Intermetallic Cermets with Low Volume Molybdenum Carbide Additions, International Journal of Powder Metallurgy, 54: 31-36. (NSERC)

(34) Jin, C. Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2017) Reciprocating Wear Behaviour of TiC-Stainless Steel Cermets, Tribology International, 105: 250-263. (NSERC)

(35) Wang, C., Farhat, Z., Jarjoura, G, Hassan, M., Abdullah, A. (2017) Indentation and Erosion Behaviour of Electroless Ni-P Coating on Pipeline Steel, Wear, 376: 1630-1639. (QNRF)

(36) Onuoha, C., Memarrashidi, Z., Kipouros, G., Farhat, Z. and Plucknett, K. (2017) Aqueous Corrosion Behaviour of TiC-304L Stainless Steel Cermets in a 3.5 wt% NaCl, International Journal of Refractory Metals and Hard Materials, 66: 234-243. (PRAC)

(37) Wang, C., Farhat, Z., Jarjoura, G, Hassan, M., Abdullah, A. and Fayyad, E. (2017) Investigation of Fracture Behavior of Annealed Electroless Ni-P Coating on Pipeline Steel using Acoustic Emission Methodology, Surface and Coating Technology, 326: 336-346. (QNRF)

(38) Islam, M. and Farhat, Z. (2017) Erosion-Corrosion Mechanism and Comparison of Erosion-Corrosion Performance of API Steels, Wear, 376: 533-541. (QNRF)

(39) Jin, C. Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2017) Microstructural Damage Following Reciprocating Wear of TiC-Stainless Steel Cermets, Tribology International, 105: 201-218. (NSERC)

(40) Almotairi, A., Warkentin, A. and Farhat, Z. (2016) Mechanical Damage of Hard Chrome Coatings on 416 Stainless steel, Engineering Failure Analysis, 66: 130-140. (NSERC)

(41) Islam, M., Alam, T. and Farhat, Z. (2016) Construction of Erosion Mechanism Maps for Pipeline Steels, Tribology International, 102: 161-173. (QNRF)

(42) Holmes, M., Ibrahim, A., Kipouros, G., Farhat, Z. and Plucknett, K. (2016) The Effect of Ni3Al Binder Content on Electrochemical Response of Melt Infiltration Processed TiC-Ni3Al Cermets, Canadian Metallurgical Quarterly, 55: 138-146. (NSERC)

(43) Onuoha, C., Jin, C., Farhat, Z., Kipouros, G and Plucknett, K. (2016) The Effects of Grain Size and Steel binder content on the Reciprocating Wear Behaviour of TiC-316L Stainless Steel Cermets, Wear, 350: 116-129. (PRAC)

(44) Holmes, M., Ibrahim, A., Kipouros, G., Farhat, Z. and Plucknett, K. (2015) The Effects of Ni3Al Binder Content on the Electrochemical Response of TiC-Ni3Al Cermets, Ceramic Engineering and Science, 36: 193-202. (NSERC)

(45) Sinha, A., Islam, M. and Farhat, Z. (2015) Reciprocating Wear Behavior of Al Alloys: Effect of Porosity and Normal Load, International Journal of Metallurgical & Materials Engineering, 1:117-126. (Auto21)

(46) Alam, T., Islam, M. and Farhat, Z. (2015) Slurry Erosion of Pipeline Steel: Effect of Velocity and Microstructure, Journal of Tribology, ASME, 138: 1-10. (QNRF)

(47) Islam, M. and Farhat, Z. (2015) Erosion-Corrosion Behavior of Pipeline Steel, Materials Performance, NACE International, 54: 62-65. (QNRF)

(48) Islam, M. and Farhat, Z. (2015) Mechanical and Electrochemical Synergism of API X42 Pipeline Steel during Erosion-Corrosion, Journal of Bio- Tribo-Corrosion, 1: 1-18. (QNRF)

(49) Neupane, R., Farhat, Z. (2015) Wear Resistance and Indentation Behavior of Equiatomic Superelastic TiNi and 60NiTi, Materials Science and Applications, 6: 694-706. (NSERC)

(50) Sinha, A. and Farhat, Z. (2015) Effect of Surface Porosity on Tribological Properties of Sintered Pure Al and Al 6061, Materials Science and Applications, 6: 549-566. (Auto21)

(51) Islam, M. and Farhat, Z. (2015) Characterization of Corrosion Layer on Pipeline Steel in Sweet Environment, The Journal of Materials Engineering and Performance, ASM International 24: 3142-3158. (QNRF)

(52) Holmes, M., Kipouros, G., Farhat, Z. and Plucknett, K. (2015) Electrochemical Behaviour of Ti(C,N)-Ni3Al Cermets, Ceramic Transactions, 252: 297-308. (PRAC)

(53) Islam, M., Alam, T., Farhat, Z., Mohamed, A. and Alfantazi, A. (2015) Effect of Microstructure on the Erosion Behavior of Carbon Steel, Wear, 332-333: 1080-1089. (QNRF)

(54) Sinha, A. and Farhat, Z. (2015) A study of Porosity Effect on the Tribological Behaviour of Cast Al A380M and Sintered Al 6061 Alloys, Journal of Surface Engineered Materials and Advanced Technology, 5: 1-16. (Auto21)

(55) Islam, M. and Farhat, Z. (2014) Effect of Impact Angle and Velocity on Erosion of API X42 Pipeline Steel under High Abrasive Feed Rate, Wear, 311: 180-190. (QNRF)

(56) Neupane, R. and Farhat, Z. (2014) Wear Mechanisms of Nitinol Under Reciprocating Sliding Contact, Wear, 315: 25-30. (NSERC)

(57) Neupane, R. and Farhat, Z. (2014) Prediction of Indentation Behaviour of Superelastic TiNi, Metallurgical and Materials Transactions A, 45: 4350-4360. (NSERC)

(58) Onuoha, C., Kipouros, G., Farhat, Z. and Plucknett, K. (2014) The Effects of Metal Binder Content and Carbide Grain Size on the Aqueous Corrosion Behaviour of TiC-316L Stainless Steel Cermets, International Journal of Refractory Metals and Hard Materials, 44: 129-141. (PRAC)

(59) Islam, M. and Farhat, Z. (2013) The synergistic effect between erosion and corrosion of API pipeline in CO2 and saline medium, Tribology International, 68: 26-34. (QNRF)

(60) Onuoha, C., Kipouros, G., Farhat, Z. and Plucknett, K. (2013) The Reciprocating Wear Behaviour of TiC-304L Stainless Steel Composites Prepared by Melt Infiltration. Wear, 303: 321-333. (PRAC)

(61) Islam, M., Farhat, Z., Mahdi, E. and Alfantazi, A. (2013) Erosion Enhanced Corrosion and Corrosion Enhanced Erosion of API X-70 Pipeline Steel, Wear, 302: 1592-1601. (QNRF)

(62) Farhat, Z., Jarjoura, G. and Shahirnia, M. (2013) Dent Resistance and Effect of Indentation Loading Rate on Superelastic TiNi Alloy, Metallurgical and Materials Transactions A, 44: 3544-3551. (NSERC)

(63) Eliyan, F., Mahdi, E., Farhat, Z. and Alfantazi (2013) Interpreting the Passivation of HSLA Steel from Electrochemical Corrosion Investigations in Bicarbonate-Oil Aqueous Emulsions, Int. J. Electrochem. Sci., 8: 3026-3038. (QNRF)

(64) Buchholz, S., Farhat, Z., Kipouros, G. and Plucknett, K. (2013) Reciprocating wear response of Ti(C,N)-Ni3Al cermets, Canadian Metallurgical Quarterly, 52: 69-80. (PRAC)

(65) Neupane, R. and Farhat, Z. (2013) Wear and Dent resistance of Superelastic TiNi alloy, Wear, 301: 682-687 (NSERC)

(66) Buchholz, S., Farhat, Z., Kipouros, G. and Plucknett, K. (2012) The Reciprocating Wear Behaviour of TiC‐Ni3Al Cermets, International Journal of Refractory Metals and Hard Materials, 33: 44-52. (PRAC)

(67) Shahirnia, M., Farhat, Z., and Jarjoura, G. (2011) Effects of Temperature and Loading Rate on the Deformation Characteristics of Superelastic TiNi Shape Memory Alloys under Localized Compressive Loads, Materials Science and Engineering A, 530: 628-632. (NSERC)

(68) Islam, M. and Farhat, Z., Bonnell J. (2011) High Pressure Water-Jet Technology for the Surface Treatment of Al-Si Alloys and Repercussion on Tribological Properties, Journal of Surface Engineered Materials and Advanced Technology, 1: 112-120. (Auto21)

(69) Islam, M. and Farhat, Z. (2011) The Influence of Porosity and Hot Isostatic Pressure Treatment on Wear Characteristics of Cast and P/M Aluminum Alloys, Wear, 271: 1594-1601. (Auto21)

(70) Nickchi, T., Ghorbani, M., Alfantazi, A. and Farhat, Z. (2011) Fabrication of Low Friction Bronze-Graphite Nano-composite Coating, Materials and Design, 32: 3548-3553. (Contract)

(71) Islam, M. and Farhat, Z. (2011) Effect of Porosity on Dry Sliding Wear of Al-Si Alloys, Tribology International, 44: 498-504. (Auto21)

(72) Farhat, Z. and Zhang, C. (2010) The Role of Reversible Martensitic Transformation in the Wear Process of TiNi Shape Memory Alloy, Tribology Transactions, 53: 917- 926. (NSERC)

(73) Islam, M. and Farhat, Z. (2010) Wear of A380M Aluminum Alloy under Reciprocating Load, Materials Engineering and Performance, 19: 1208-121. (Auto21)

(74) Wilson, D., Dunbar, M., Amirault, J. and Farhat, Z. (2010) Early Failure of a Modular Femoral Neck Total Hip Arthroplasty Component, J. of Bone and Joint Surgery, 92: 1514-1517. (Contract)

(75) Deen, K., Ahmad, R., Khan, I. and Farhat, Z. (2010) Microstructural Study and Electrochemical Behavior of Low Alloy Steel Weldment, Materials and Design 31: 3051-3055. (Contract)

(76) Stewart, T., Collier, B., Farhat, Z., Kipouros, G. and Plucknett, K. (2010) Melt-Infiltration Processing of Titanium Carbide-Stainless Steel Cermets, Ceramic Engineering and Science, 31: 97-104. (PRAC)

(77) Farhat, Z and Zhang, C. (2010) On the Deformation of Superelastic NiTi Alloy, Tribology Letters 37: 169-173. (NSERC)

(78) Zhang, C. and Farhat, Z. (2009) Sliding Wear of Superelastic NiTi Alloy, Wear 267: 294-400. (NSERC)

(79) Farhat, Z. (2009) Wear Resistant Composite Coatings, Mater. Characterization 60: 337-345. (NSERC)

(80) Farhat, Z. and Alfantazi, A. (2008) High Surface Area Mechanically Alloyed Pt-Based Catalyst, Materials Science and Engineering A, 476: 169-173. (NSERC)

(81) Farhat, Z. (2008) Mechanical Anisotropy in Metal alloy Tubing, Materials Science and Engineering A 474: 96-103. (NSERC)

(82) Pharkya, P., Alfantazi, A. and Farhat, Z (2005) Fabrication using High Energy Ball Milling Technique and Electrochemical Characterization of Pt-Co Electrocatalyst for Oxygen Reduction in Polymer Electrolyte Fuel Cells, Journal of Fuel Cell Science and Technology 2: 171-178. (NSERC)

(83) Farhat, Z. (2004) Modeling of Catalyst Layer Microstructural Refinement and Catalyst Utilization in PEM Fuel cell, Journal of Power Sources 138: 68-78. (NSERC)

(84) Farhat, Z. (2003) Microstructural Characterization of WC-TiC-Co Cutting Tools During High Speed Machining of P20 Mold Steel, Materials Characterization 51: 117-130. (NSERC)

(85) Farhat, Z. (2003) Wear Mechanism of CBN Cutting Tool during High Speed Machining of Mold Steel, Journal of Materials Science and Engineering A 361: 100-110. (NSERC)

(86) Farhat, Z. (2001) Contribution of Crystallographic Texturing to the Friction and Wear Behavior of FCC and HCP Metals, Wear 250: 401-408. (NSERC)

(87) Farhat, Z., Ding, Y., Northwood, D. and Alpas, A. (1997) Nanoindentation and Friction studies on Ti-Based Nanolaminated Composite Films, Surface Coatings Technology 89: 24-30. (NSERC)

(88) Farhat, Z., Ding, D., Alpas, A. and Northwood, D. (1997) The Processing and Testing of New and Advanced Materials for Wear Resistant Coatings, Journal of Materials Processing Technology 63: 859-864. (NSERC)

(89) Farhat, Z., Ding, Y., Northwood, D. and Alpas, A. (1996) The Effect of Grain Size on The Friction and Wear of Nanocrystalline Aluminum, Material Science and Engineering A 206: 203-313. (NSERC)

(90) Farhat, Z., Ding, Y., Northwood, D. and Alpas, A. (1994) Mechanical Properties and Tribological Behaviour of Nanolayered Al/Al2O3 and Ti/TiN Composites, Surface Coatings Technology 68/69: 459-467. (NSERC)

(91) Farhat, Z. and Northwood, D. (1993) A Study of Recovery, Recrystallization, Grain Growth and Phase Transformations During The Annealing of Cold-Worked Zircaloy-4, Materials Science Forum 113-115: 649-654. (NSERC)

(92) Rana, A. and Farhat, Z. (2020) Neighbourhood Watch – A Right Step Towards Asset Integrity, CORROSION 2020, Houston, Texas, USA. (NSERC)

(93) Rana, A., Farhat, Z. and Jarjoura, G. (2020) Preparation and Tribological Characterization of Graphene Enriched Ni-P Coatings on X70 Pipeline Steel, CORROSION 2020, Houston, Texas, USA. (NSERC)

(94) Gorman, B., Warkentin, A. and Farhat, Z. (2019) Comparison Between A Novel Residual Strain Analysis Method and A Finite Element Model, Proceeding of CANCAM19, Sherbrooke, QC, May. (NSERC)

(95) Gaier, M., Sparling, W., Memarrashidi, Z., Farhat, Z. and Plucknett, K. (2017) Microstructure Development and Sintering Response of Inter metallic Cermets with Molybdenum Carbide Additions, POWDERMETT2017, Las Vegas, Nevada, USA. (NSERC)

(96) Jin, C., Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2016), Focused Ion Beam Microscope Characterization of Reciprocating Wear Damage in TiC-316L Stainless Steel Cermets, Proceedings of 2016 Annual Meeting of Microscopical Society of Canada, Edmonton, Canada. (NSERC)

(97) Gadala, I., Alfantazi, A., Farhat, Z. and Mohamed, A. (2015) External Corrosion of API-x100 Pipeline Steels in Near-Neutral pH Soil of Variable Aeration and Nitrate Ion Content, Rio Pipeline Conference and Exposition 2015. (QNRF)

(98) Gadala, I., Alfantazi, A., Farhat, Z. and Mohamed, A. (2015) High Strength Low Alloy (HSLA) Steel Pipeline External Dissolution, EUROCORR 2015. (QNRF)

(99) Lin, C., Dadvand, N., Farhat, Z. and Kipouros, G. (2013) Electroless Ni-P Plating on Carbon Steel, Proceedings of Materials Science and Technology 2013, Montreal, QC, October . (NSERC)

(100) Holmes, M., Kipouros, G., Farhat, Z. and Plucknett, K. (2012) SEM Characterisation of Aqueous Corrosion in Ti(C,N)/Ni3Al Cermets, Proceedings of the 2012 Annual Meeting of the Microscopical Society of Canada, Halifax, Nova Scotia, Canada. (NSERC)

(101) Onuoha, C., Kipouros, G., Farhat, Z. and Plucknett, K. (2012) Characterisation of Reciprocating Wear in TiC/Stainless Steel Composites, Proceedings of the 2012 Annual Meeting of the Microscopical Society of Canada, Halifax, Nova Scotia, Canada. (NSERC)

(102) Islam, M., Farhat, Z. and Mahdi, E. (2012) Influence of Impact Angle and Velocity on Erosion of AISI 1018 Steel Under Jet Impingement, Proceeding of the 3rd International Gas Proc. Symp., Qatar, March. (QNRF)

(103) Zhang, C. and Farhat, Z. (2009) Micromechanical Properties of TiNi Shape Memory Alloy, Proceeding of CANCAM09, Halifax, NS, June. (NSERC)

(104) Farhat, Z. (2006) On the Wear of Cutting Tools in High Speed Machining, Proceeding of Conference of Metallurgists, COM2006, Montreal, QC, October. (NSERC)

(105) Pharkya, P., Farhat, Z, Czech, E. and Alfantazi, A. (2003) Fabrication and Characterization of Nanostructured Mechanically Alloyed Pt-Co Catalyst for Oxygen Gas-Diffusion-Electrode, Hydrogen & Fuel Cells Conference 2003, Vancouver, BC, June. (NSERC)

(106) Farhat, Z., Alpas, A. and Northwood, D. (1996) Application of X-ray Diffraction Techniques to the Understanding of Dry Sliding Wear Behavior of Aluminum and Titanium, The Asian Conference on X-ray and Related Techniques in Research and Industry ACXRI 96, Malaysia, June. (NSERC)

(107) Farhat, Z., Ding, Y., Northwood, D. Alpas, A. (1995) Tribological Properties of Microlaminated Al/Al2O3Ccomposites, New Horizons for Materials, Advances in Science and Technology 4, Florence, Italy, July. (NSERC)

(108) Ding, Y., Farhat, Z., Northwood D. and Alpas, A. (1995) The Preparation, Mechanical Properties and Wear Behaviour of Monolithic TiN and Microlaminated Ti/TiN Surface Coatings, The International Conference on Surface Science and Engineering, Beijing, China, May. (NSERC)

(109) Fayyad, E., Abdullah, A., Hassan, M., Pathath, A., Mahmoud, K., Jarjoura, G., Farhat, Z. (2020) Novel Electroless Deposited Corrosion – Resistant and Anti-Bacterial NiP–TiNi Nanocomposite Coatings, Annual Research Forum & Exhibition 2020, Doha, Qatar. (QNRF)

(110) Rana, A. and Farhat, Z. (2020) Neighborhood Watch – A Right Step Towards Asset Integrity, CORROSION 2020, Houston, Texas, USA (NSERC)

(111) Rana, A. and Farhat, Z. (2020) Influence of graphene enrichment on erosion-corrosion and cracking behaviors of electroless Ni-P composite coatings, CORROSION 2020, Houston, Texas, USA (NSERC)

(112) Maclean, M. and Farhat, Z. (2019) Indentation and Wear of Ni-P-NiTi Composite Coating, Wear of Materials WOM2019, Miami, Florida, USA. (QNRF)

(113) Rana, A. and Farhat, Z. (2019) Qualitative RBI Approach for Heat Exchangers Damages Mitigation, API Inspection and Mechanical Integrity Summit 2019, Galveston, Texas, USA (NSERC)

(114) Gorman, B., Warkentin, A. and Farhat, Z. (2019) A Novel FIB Residual Strain Analysis and Comparison to FEM, CANCAM19, Sherbrooke, QC, Canada. (NSERC)

(115) Rana, A. and Farhat, Z. (2019) Qualitative RBI - An Effective Corrosion Combating Tool, NACE Northern Area Western Conference NAWC2019, Calgary, Alberta, Canada (NSERC)

(116) Hassan, M., Fayyad, E., Abdullah, A., Mohamed, A., Jarjoura, G. and Farhat, Z. (2019) Novel NiP-TiNi Nanocomposite Coatings for Harsh oil and Gas Environments made by the Electroless Technology, The 257TH American Chemical Society Conference Meeting, Orlando, Florida, USA. (QNRF)

(117) Rana, A. and Farhat, Z. (2018) Qualitative RBI - A Dandy Start for Combating Material Damage Mechanisms, NACE Northern Area Eastern Conference NAEC2018, Halifax, Nova Scotia, Canada. (NSERC)

(118) Hassan, M., Fayyad, E., Abdullah, A., Mohamed, A., Jarjoura, G. and Farhat, Z. (2018) Novel Electroless Plated Ni-P-C3N4 Nanocomposite Coating with Outstanding Performance, The 255th American Chemical Society Conference Meeting, New Orleans, Louisiana, USA. (QNRF)

(119) Wang, C. and Farhat, Z. (2017) Ni-P coatings on pipeline steel: characterization and degradation behavior analysis, Wear of Materials WOM2017, Long Beach, California, USA. (QNRF)

(120) Gaier, M., Sparling, W., Memarrashidi, Z., Farhat, Z. and Plucknett, K. (2017) Sintering of Intermetallic Cermets with Molybdenum Carbide, POWDERMETT2017, Las Vegas, Nevada, USA (NSERC)

(121) Wang, C., Islam, M. and Farhat, Z. (2017) Erosion-Corrosion of API Steel, Wear of Materials WOM2017, Long Beach, California, USA. (QNRF)

(122) Wang, C. and Farhat, Z. (2017) Indentation and erosion behavior of electroless Ni-P coating on pipeline steel, Wear of Materials WOM2017, Long Beach, California, USA. (QNRF)

(123) Jin, C., Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2016), Focused Ion Beam Microscope Characterization of Reciprocating Wear Damage in TiC-316L Stainless Steel Cermets, 2016 Annual Meeting of Microscopical Society of Canada, Edmonton, Canada. (NSERC)

(124) Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2015) The Sliding Wear Performance of Titanium Carbide-Stainless Steel Cermets, Coference of Metallurgists (COM2015), Toronto, Ontario. (PRAC)

(125) Alam, T., Islam, M. and Farhat, Z. (2015) Solid Particle Erosion of AISA 1018 and 1080 Steels: Effect of Particle Velocity, Impact Angle and Microstructure, The 27th Canadian Materials Science Conference (CMSC), Halifax, Nova Scotia, Canada. (QNRF)

(126) Sinha, A., Farhat, Z. (2015) Tribological Response of Porous P/M Aluminum Alloys, AUTO21 Annual Conference, Ottawa, Ontario, May. (Auto21)

(127) Gadala, I., Alfantazi, A., Farhat, Z. and Mohamed, A. (2015) External Corrosion of API-x100 Pipeline Steels, Rio Pipeline Conference and Exposition 2015. (QNRF)

(128) Gadala, I., Alfantazi, A., Farhat, Z. and Mohamed, A. (2015) Dissolution of High Strength Low Alloy (HSLA) Steel Pipeline, EUROCORR 2015. (QNRF)

(129) Islam, M. and Farhat, Z. (2015) Solid Particle Erosion and Mechanism Map for Pipeline Steel, The 27th Canadian Materials Science Conference (CMSC), Halifax, Nova Scotia, Canada. (QNRF)

(130) Sinha. A., Islam, M. and Farhat, Z. (2015) Effect of Surface Porosity on Wear Behaviour of Aluminum Alloys, The 27th Canadian Materials Science Conference (CMSC), Halifax, Nova Scotia, Canada. (QNRF)

(131) Islam, M. and Farhat, Z. (2015) Erosion Mechanism Map for API X70 Pipeline Steel, Wear of Materials WOM2015, Toronto, Ontario, Canada. (QNRF)

(132) Islam, M. and Farhat, Z. (2015) Effect of the Microstructure on the Erosion Behaviour of Carbon Steel, Wear of Materials WOM2015, Toronto, Ontario, Canada. (QNRF)

(133) Almotairi, A., Warkentin, A. and Farhat, Z. (2015) Characterization of Hard Chrome Plated on 416 Stainless Steel, The 27th Canadian Materials Science Conference (CMSC), Halifax, Nova Scotia, Canada. (NSERC)

(134) Sinha, A., Farhat, Z. (2014) Effect of High Pressure Water Jet Treatment Surface Properties of P/M Al-Si Alloys, AUTO21 Annual Conference, Niagara Falls, Ontario, May. (Auto21)

(135) Islam, M., Farhat, Z (2014) Comparative Corrosion Study of API X42, API 70, AISI 1018 and AISI 1080 Steel: the Effect of Salt Concentration, NACE Northern area Western Conference, Edmonton, Alberta, January. (QNRF)

(136) Islam, M., Alam, T., Farhat, Z., Mohamed, A. and Alfantazi, A. (2014) Erosion Mechanisms of Pipeline Steels, NACE Northern area Western Conference, Edmonton, Alberta, January. (QNRF)

(137) Islam, M., Farhat, Z. (2013) Erosion – corrosion of API X70 Oil and Gas Pipeline Steel, NACE Northern area Eastern Conference, Halifax, Nova Scotia, October. (QNRF)

(138) Islam, M., Farhat, Z. (2013) Effect of Impact Angle and Particle Velocity on Erosion – Corrosion of API X42 Steel, NACE Northern area Eastern Conference, Halifax, Nova Scotia, October. (QNRF)

(139) Sinha, A., Farhat, Z. (2013) Surface Characterization of P/M Automotive Al-Si Alloys, AUTO21 Annual Conference, Toronto, Ontario, May. (Auto21)

(140) Islam, M., Farhat, Z. (2013) A Study of Erosion-Corrosion Behaviour of HSLA Steels, 19th International Conference on Wear of Materials, Portland, Oregon, USA, April. (QNRF)

(141) Neupane, R., Farhat, Z. (2013) Reciprocating Wear of Superelastic TiNi alloy, 19th International Conference on Wear of Materials, Portland, Oregon, USA, April. (NSERC)

(142) Islam, M., Farhat, Z. (2013) Characterization of Synergistic Effects between Erosion and Corrosion in CO2 and Saline Medium, 19th International Conference on Wear of Materials Portland, Oregon, USA, April. (QNRF)

(143) Frampton, N., Islam, M. and Farhat, Z. (2013) Particle Velocity Effect on the Erosion of Low Carbon Steel, 19th International Conference on Wear of Materials, Portland, Oregon, USA, April. (QNRF)

(144) Onuoha, C., Kipouros, G, Farhat, Z., and Plucknett, K. (2013) Corrosion Behaviour of Titanium Carbide-Stainless Steel Composites in Synthetic Seawater, 2nd Annual Global Young Investigator Forum (GYIF): Ceramic processing and application: novel processing and synthesis routes session at the 37th International Conference & Exposition on Advanced Ceramics & Composites (ICACC).Daytona Beach Florida, USA. January. (PRAC)

(145) Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2013) The Sliding Wear Behaviour of TiC-316L Stainless Steel Composites, Symposium 1: Mechanical Behavior & Performance of Ceramics & Composites: Tribological performance of ceramics and composites session at the 37th International Conference & Exposition on Advanced Ceramics & Composites (ICACC) Daytona Beach Florida, USA. January. (PRAC)

(146) Neupane, R., Farhat, Z. (2013) Deformation Characteristics of SMA during Wear, 19th International Conference on Wear of Materials Portland, Oregon, USA, April. (NSERC)

(147) Islam, M., Farhat, Z. and Mahdi, E. (2012) Effect of Particle Velocity and Impact angle on Erosion Corrosion of API X-70 Pipeline Steel in Corrosive Environment, 3rd International Symposium on Tribo-Corrosion, Atlanta, Georgia, USA, April. (QNRF)

(148) Islam, M., Farhat, Z. and Mahdi, E. (2012) Erosion-Corrosion and Synergistic Effects of API Pipeline Steel under Jet Impingement, Third Int. Symp. on Tribo-Corrosion, Atlanta, Georgia USA, April. (QNRF)

(149) Islam, M., Farhat, Z. and Mahdi, E. (2012) A Study of Erosion by Solid Particle Impingement on API Pipeline Steel, 3rd International Gas Proc. Symp., Qatar, March. (QNRF)

(150) Islam, M., Farhat, Z. and Mahdi, E. (2012) Effect of Attach Angle and Velocity on Material Removal in Wet Erosion of API Gas Pipelines, 3rd Int. Gas Proc. Symp., Qatar, March. (QNRF)

(151) Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2012) Effect of Microstructure and Grain Size on the Wear Behaviour of Melt-Infiltrated TiC- 316L Stainless Steel Composites, Proceeding of Microscopical Society of Canada, Annual Meeting, Halifax, Canada, June. (PRAC)

(152) Holmes, M., Farhat, Z., Kipouros, G and Plucknett, K. (2012) Electrochemical Behaviour of Ti(C,N)-Ni3Al Cermet, Proceeding of Microscopical Society of Canada, Annual Meeting, Halifax, Canada, June. (PRAC)

(153) Islam, M., Farhat, Z. (2012) Surface Treatment of Al-Si Alloys using High Pressure Water Jet Technology, AUTO21 Annual Conference, Montreal, Quebec, May (Auto21)

(154) Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2012) Microstructure and Wear Behaviour of TiC-304L Stainless Steel Composites, 24th CMSC Conference, London, Ontario, June. (PRAC)

(155) Onuoha, C., Farhat, Z., Kipouros, G and Plucknett, K. (2012) Corrosion Behaviour of Titanium Carbide-Stainless Steel Composites in Saline Solution, Institute of Materials Research Annual General Meeting, Halifax, June. (PRAC)

(156) Onuoha, C., Kipouros, G., Farhat, Z and Plucknett, K. (2012) Corrosion Behaviour of Titanium Carbide-Stainless Steel Composites in Saline Solution, NACE Corrosion Conference, Toronto, October. (PRAC)

(157) Allen, J., Bergeron, P., Farhat, Z., Kipouros, G. and Plucknett, K. (2011) The Aqueous Slurry Erosion Behaviour of Baseline Stainless Steels, Canad. Mat. Sci. Conf., Kelowna, BC, June. (PRAC)

(158) Onuoha, C., Farhat, Z., Kipouros, G. and Plucknett, K. (2011) Development and Characterisation of Melt‐infiltrated TiC‐Stainless Steel Composites, Can. Mat. Sci. Conf., Kelowna, BC, June. (PRAC)

(159) Islam, M. and Farhat, Z. (2011) Influence of Porosity on Wear Performance of Cast and Sintered Al – Si Alloys, Wear of Materials conference, WOM2011, Philadelphia, USA, April. (Auto21)

(160) Buchholz, S., Farhat, Z., Kipouros, G. and Plucknett, K. (2011) The Fretting Wear Response of Ti(C,N)‐Ni3Al Cermets, Canad. Mat. Sci. Conf., CMSC2011, Kelowna, BC, June. (PRAC)

(161) Islam, M. and Farhat, Z. (2011) Effect of High Pressure Water jet Treatment on Tribological Properties of HPDC A380M Alloy, Auto21, Ottawa, ON, May. (Auto21)

(162) Islam, M. and Farhat, Z. (2011) The Effect of Porosity on the Sliding Wear Behaviour of Al-Si Alloy, Wear of Materials conference, WOM2011, Philadelphia, USA, April. (Auto21)

(163) Islam, M. and Farhat, Z. (2010) Effect of Surface Porosity and Surface Treatments on Tribological Properties of HPDC Aluminum A380M Alloy, Auto21, Windsor, ON, May. (Auto21)

(164) Stewart, T., Collier, B., Farhat, Z., Kipouros, G. and Plucknett, K. (2010) Processing of Titanium Carbide-Stainless Steel Cermets, 34th International Conference and Exposition on Advanced Ceramics and Composites (ICACC), Daytona Beach, USA, August. (PRAC)

(165) Stewart, T., Collier, R., Farhat, Z., Kipouros, G. and Plucknett, P. (2010) Wear of Titanium Carbide-Stainless Steel Composites Prepared by Melt-Infiltration, Materials Science & Technology, Houston, USA, October. (PRAC)

(166) Shahirnia, M., Farhat, Z., and Jarjoura, G. (2010) Deformation Behaviour of TiNi Shape Memory Alloy under a Spherical Indenter, Conference of Metallurgists, Vancouver. BC, October. (NSERC)

(167) Islam, M. and Farhat, Z. (2010) Porosity and HIP Effects on Wear Alloy, Conference of Metallurgists, Vancouver. BC, October. (Auto21)

(168) Shahirnia, M., Farhat, Z., and Jarjoura, G. (2010) Load and Temperature Effects on the Superelastic Characteristics of TiNi under Localized Compressive Load, Conference of Metallurgists, Vancouver. BC, October. (NSERC)

(169) Stewart, T., Collier, R., Farhat, Z., Kipouros, G. and Plucknett, P. (2010) Development of Wear Resistant Titanium Carbide-Stainless Steel Composites, Can. Mat. Sci. Conf., Waterloo, July. (PRAC)

(170) Wilson, D., Dunbar, M., Amirault, J. and Farhat, Z. (2010) Failure of a Modular Neck of a Total Hip Replacement Component, Orthopaedia 65th COA Annual Meeting, Edmonton, AB, June. (Contract)

(171) Zhang, C. and Farhat, Z. (2009) Tribological and Microstructural Characterization of NiTi Alloy, Wear of Materials conference, WOM2009, Las Vegas, April. (NSERC)

(172) Islam M. and Farhat, Z. (2009) Effect of Surface Porosity on Tribological Properties of HPDC Aluminum A380M Alloy, Auto21, Hamilton, May. (Auto21)

(173) Zhang, C. and Farhat, Z. (2008) Wear Mechanisms in TiNi against WC Counterface, Conference of Metallurgists, COM2008, Winnipeg, MT, August. (NSERC)

(174) Zhang, C. and Farhat, Z. (2008) Effect of Superelastic Behavior on Wear Resistance of TiNi, Conference of Metallurgists, COM 2008, Winnipeg, MT, August. (NSERC)

(175) Farhat, Z. (2006) Wear of CBN, Canad. Mat. Sci. Conf., CMSC2006, Montreal, QC, June. (NSERC)

(176) Badhesha, A., Gerwal, J. and Farhat, Z. (2004) The Effect of MEA Design and Preparation Method on Catalyst Utilization and PEMFC Performance, Materials Science Student Conference, Vancouver, BC, Jan.

(177) Pharkya, P., Gerwal, J. and Farhat, Z. (2004) Catalyst Layer Microstructure and its effect on PEM Fuel cell Performance, International Conference on Fuel Cell Development and Deployment, Storrs, Connecticut, USA, March.

(178) Bone, R., Kung N. and Farhat, Z. (2004) Effect of Catalyst Particle Size on the Polarization Characteristics of PEM Fuel Cell, Materials Science Student Conference, Vancouver, BC, Jan. (contract)

(179) Farhat, Z., Czech, E. and Alfantazi, A. (2003) Mechanochemical Synthesis of Novel Pt-Based Catalysts for PEM Fuel Cells, The Conference of Metallurgists COM 2003, Vancouver, BC, Canada, Aug. (NSERC)

(180) Farhat, Z. Ding, Y., Northwood, D. and A. T. Alpas (1997) Fabrication by Magnetron Sputtering of Al-Cu-Fe Quasicrystalline Films for Tribological Applications, The 24th International Conference on Metallurgical Coatings and Tin Films, San Diego, CA, USA, April. (NSERC)

(181) Farhat, Z., Ding, Y., Northwood, D. and Alpas, A. (1993) Preparation and Mechanical Properties of Microlaminated Al/Al2O3 Composites for Tribological Applications by RF Sputtering, Canadian Materials Science Conference CMSC 1993, Kingston, ON, June. (NSERC)

(182) Farhat, Z., Ding, Y., Northwood, D. and Alpas, A. (1993) Microstructure and Mechanical Properties of Nanocrystalline Laminates Al/Al2O3, Interfaces II, Australia, November. (NSERC)

(183) Farhat, Z. (2008) Corrosion and Wear of Materials, Proceedings of the Conference of Metallurgists COM 2008, Winnipeg, MT, 300 Pages.

(184) Jin, C., Memarrashidi, Z., Gaier, M., Farhat, Z. and Plucknett, K. (2016) Using Combined Microscopy Techniques to Assess Sliding Wear Damage in High Performance Cermets, Publication in Microscopy and Imaging Science: Practical Approaches to Applied Research and Education (Microscopy Book Series #7), Formatex Research Center, Spain.

(185) Farhat, Z. (2005) Microstructure of the Catalyst Layer in PEM Fuel Cell in “Advances in Fuel Cells”, editor, Xiang-Wu Zhang, Research Signpost.

© Advanced Tribology Laboratory, All Rights Reserved.
Designed by Mixdia Digital Solutions